Nine disciplines, one engineering team.
Each system below is scoped, designed, and documented by engineers who have run it in the field — not a generalist consultancy working from a brochure.
SYS-01 Mechanical Engineering Design
Core process and utility design work — sizing, selecting, and documenting the mechanical backbone of a plant or facility.
- Process equipment design
- Piping system design
- Utility system design
- Mechanical equipment selection & sizing
- Design review & value engineering
- Technical due diligence
SYS-02 MEP Engineering & BIM Coordination
Coordinated mechanical, electrical, and plumbing design for buildings — clash-checked and construction-ready.
- HVAC system design
- Electrical system design
- Plumbing & drainage design
- Fire protection & life safety design
- ELV & low current systems
- MEP coordination & BIM support
SYS-03 Steam & Industrial Utility Engineering
Boiler plant and steam network design, plus the compressed air, cooling, chilled water, and fuel systems that support them.
- Boiler plant design
- Steam distribution networks
- Condensate recovery systems
- Steam pressure reduction stations
- Steam energy audits & optimization
- Compressed air, cooling water & fuel handling
SYS-04 Thermal Oil Heating Systems
Thermic fluid heating for process and storage applications, including bitumen and heavy-fuel heating networks.
- Thermic fluid heater design
- Bitumen heating systems
- Storage tank heating systems
- Process heating systems
- Heat transfer calculations
- Thermal oil network design
SYS-05 HVAC & Thermal Energy Systems
Commercial and specialized HVAC — from chiller plants to cleanroom pressure regimes and smoke management.
- Chilled water & air-cooled chiller systems
- VRF/VRV systems
- AHU & FCU systems
- Smoke management systems
- Hospital, hotel & clean room HVAC
- Data center & pharmaceutical HVAC
SYS-06 Industrial Automation & Control
Process control and building automation, from plant-floor PLCs to the BMS that runs a hotel or hospital.
- PLC programming & SCADA systems
- HMI development
- Industrial instrumentation
- Building management systems (BMS)
- Energy management systems
- Lighting control & smart building integration
SYS-07 Mechanical Design & Fabrication Engineering
3D modeling and shop-ready drawings for the tanks, skids, and structures that get built from your design.
- 3D modeling & CAD design
- Fabrication & GA drawings
- Piping isometrics
- Storage tanks & pressure vessels
- Process skids & pipe spools
- Steel structures & utility modules
SYS-08 Tank Farms & Process Facilities
Storage and terminal infrastructure for bitumen and fuel — from tank design through pipeline networks and process safety.
- Bitumen storage terminals
- Fuel storage facilities
- Tank farm design
- Loading & unloading systems
- Pipeline networks
- Process safety engineering
SYS-09 EPC & Project Delivery
Full-lifecycle delivery — engineering, procurement, and construction supervision under a single accountable team.
- Concept development & FEED studies
- Detailed engineering
- Procurement support
- Construction supervision
- Commissioning & start-up
- Project management & QA/QC
Built for facilities where downtime isn't an option.
The same engineering discipline, applied across generation, healthcare, hospitality, and heavy industry.
Power & Energy Generation
- Combined cycle power plants
- Reciprocating engine plants
- Cogeneration systems
- HRSG & plant utility systems
Hospitality & Healthcare
- Hotels & resorts
- Hospitals & clinical facilities
- Clean room environments
- Pharmaceutical HVAC
Industrial & Process
- Process plants & utilities
- Tank farms & terminals
- Thermal oil & steam systems
- Fabrication & skid packages
Commercial & Infrastructure
- Shopping malls
- Office buildings
- Educational facilities
- Data centers
From concept to commissioning, in sequence.
One team carries the project through every phase, so nothing is lost in handover between design and construction.
Concept Development
Define scope, constraints, and technical feasibility.
FEED Studies
Front-end design to lock in system architecture and cost basis.
Detailed Engineering
Construction-ready drawings, calculations, and specifications.
Procurement Support
Vendor evaluation, BOQ, and technical bid review.
Construction Supervision
QA/QC and site engineering through installation.
Commissioning & Start-up
Performance testing and handover to operations.